Apex has a complete fabrication department consisting of a Programmable Saw, MIG, TIG and ARC
Welding Machines, Pedestal Grinders, Oxy/Acetylene Torches, Carbon Arc Torches, and Flat Weld Tables,
all supported by (2) ten ton overhead cranes. Following is a partial list of our fabrication equipment,
with new equipment being added as required for specific programs:
|
|
|
| 1 |
Hydro Mechanic V-18A |
Vertical Band Saw capable of cutting all types of material 36" wide x
36" high x any length. The saw has a Mitsubishi based PLC 500 programmable control
system capable of making cuts to within .010" at various angles "automatically"
at pre-programmed values.
|
| 1 |
Metal Mizer |
Vertical Band Saw capable of cutting all types of material 24" wide x 24" high x any length. |
| 6 |
Miller Synchrowave 300A |
Combination MIG, TIG and ARC machines capable of welding all types of material, including steel, stainless steel and aluminum. |
| 6 |
Lincoln |
Combination TIG and ARC machines capable of welding all types of material, including steel, stainless steel and aluminum. |
| 2 |
Miller Synchrowave |
Portable field weld machines which can be set up for MIG, TIG and ARC welding on all types of material, including steel, stainless steel and aluminum. |
| 1 |
Aronson |
360 Degree weld positioner, capable of rotating weldments up to 1000 pounds. |
| 1 |
Nelson |
Stud Welder, capable of welding up to 3/8" threaded studs on to steel frames or panels. |
| 1 |
Metal Muncher |
Combination Brake/Press for cutting or forming all types of plates up to 1/2" thick x 24". |
| 2 |
Phoenix |
1000 Watt weld rod electrode stabilizing ovens. |
| 1 |
I.C.M. |
Sandblast Booth capable of sandblasting parts as large as 36" long x 36" wide x 48" high. |
| 1 |
Apex |
Fully Enclosed Paint Spray Booth 12' x 24'. |
| 1 |
Apex |
Hydraulic Press to 150 ton. |
| 1 |
LOT |
Miscellaneous saws, pedestal grinders, belt sanders, pneumatic grinders, weld tables and hand tools of all types. |
Apex has a modern, fully equipped machine department consisting of a Large Floor Mill, CNC Machining
Centers, Bridgeport Mills, Lathes, Surface Grinder, Drill Presses, Granite Surface Table and other
miscellaneous machining equipment, all supported by (2) ten ton overhead cranes. CADD/CAM software
includes Mastercam, CATIA, Pro-E, and Unigraphics. The following is a partial list of our current
machining equipment, with new equipment being added as required for specific programs:
|
|
|
| 1 |
HAAS VF9 |
4-Axis CNC Machine Center capable of machining parts 84"(x) by 40"(y) by 30"(z). The machine has been retrofitted with a rotary table, Renishaw Inspection Probe and is Laser Calibrated. |
| 2 |
HAAS VF4 |
4-Axis CNC Machine Center capable of machining parts 50"(x) by 20"(y) by 25"(z). The machine has been retrofitted with a rotary table, Renishaw Inspection Probe and is Laser Calibrated. |
| 1 |
HAAS VF5 |
4-Axis CNC Machine Center capable of machining parts 50"(x) by 26"(y) by 25"(z). |
| 1 |
Nicholas Correa FP-40 |
Full 5-Axis knuckle, 50 Horsepower 50" taper spindle capable of machining parts 196.8"(x) by 127.9"(y) by 39.3"(z). |
| 1 |
Cincinnati Milicron |
3-Axis CNC Mill with a machine envelope of 26"(x) by 50"(y) by 20"(z). |
| 1 |
Mitsubishi |
Horizontal Boring Mill with a 3-Axis capability of 16 Feet (x) by 22 Feet (y) by 12 Feet (z). The machine has a rotary table and a 90 degree head for vertical machining. |
| 1 |
Collet |
Horizontal Boring Mill with a 3-Axis capability of 4 Feet (x) by 8 Feet (y) by 3 Feet (z). The machine has a rotary table and a 90 degree head for vertical machining. |
| 1 |
Boyar and Schultz |
Surface Grinder with a machine envelope of 12" (x) by 36" (z) travel. |
| 1 |
Giddings and Lewis |
Radial Arm Drill capable of large drill diameters with an envelope of 60"(x) by 36"(y) by 36" (z). |
| 3 |
Bridgeport |
Vertical Mills with Digital Readouts and a machine capacity of 9"(x) by 32"(y) by 18"(z). |
| 1 |
Acra |
Vertical Mills with Digital Readouts and a machine capacity of 14"(x) by 58"(y) by 24"(z). |
| 1 |
LeBlond |
Engine Lathe with Digital Readout and a capacity of 15" diameter by 12 Ft thru the throat. |
| 1 |
Gwang Ju Namseon |
Engine Lathe with Digital Readout and a capacity of 18" diameter by 16 Ft thru the throat. |
| 1 |
Apex |
20" Rotary Sander. |
| 1 |
LOT |
Miscellaneous drills, pedestal grinders, sharpeners, angle plates and hand tools of all types. |
Apex has a full complement of assembly equipment consisting of tube bending, forming and flaring
as well as various types of measuring equipment for pneumatic and hydraulic testing. The following
is a partial list of our current assembly and shop equipment, with new equipment being added as
required for specific programs:
|
|
|
| 2 |
Rigid |
|
| 3 |
Leonard |
|
| 3 |
Parker |
|
| 2 |
Lakeland |
|
| 1 |
Brobo |
|
| 1 |
LOT |
|
| 1 |
LOT |
Hedland Flow Meters calibrated from .4 - 200 GPM. |
| 3 |
Apex |
Hydraulic Test Units 4 to 50 GPM and up to 10,000 psi. |
| 3 |
SC Hydraulics |
Hi Pressure Pumps .04 GPM |
| 4 |
Apex |
Hydraulic Flushing Carts to 3 micron for water and dirt contamination. |
| 1 |
Upright |
Electric Scissor Lift - 26 ft. total lift. |
|
